[update] it appears that only the pwd Admin is a valid account 2) When I connect my router (Netgear R8000) directly to the NBN NTD, the DNS server stops responding after a minute or so resulting in no IP assigned to my router i.e. However I was successful connecting my laptop directly to NBN NTD's Uni-D1 using a LAN cable and was able to connect to internet for a long period of time without an issue. X-Lite I just need to migrate the settings correctly to my PAP2 I believe..
Now I'm dealing with Problem 1) Register Optus Vo IP with my ATA (PAP2) predominantly because Sagemcom doesn't seem to dial out from inside my R8000 router anymore. Now I'm dealing with Problem 1) Register Optus Vo IP with my ATA (PAP2) predominantly because Sagemcom doesn't seem to dial out from inside my R8000 router anymore. Has anyone had success in setting up a voip client such as Zoiper on a mobile device, using their Optus account?
Unfortunately the Y3s0ptus password doesn't work on mine, nor any of the other suggested defaults that I've found (password, admin, blank password, etc).
I'm a bit out of my depth here, so I really appreciate the help I have just connected to the Optus entertainment bundle. I am unable to dial 13xxxx, 1300, 1800 and presumably 1900 numbers. yep will try that and see how it goes but now having some time to look through the sagemcom i find it has dect and i have been able to reg the gigaset phone to the sagemcom but im still trying to make the dect work with the rest of the phones connected to phone 1 as atm when i try and use the gigaset is just making at try but no dial tone or connection , it must be a setting somewhere in the sip or dect section of the sagemcom this sagemcom has got some great hidden features and it even supports 3g backup and has L2TP Client vpn what im not wondering is if i just disable the nat on the Internet-BNG connection will the wireless router behind it just connect as if the it where connected directly to the ntd and at the same time as the voip is a separate connection it would just still work as normal on the sagemcom as that would be the best way to go if it works Did anyone ever get port-forwarding to work. But I can't test it from within the network, even when using the external IP it does not work, testing it via the mobile phone connection works. ok so that suggest it doesnt have nat loopback which hardly surprises me but if you go have a look at
Apparently their system hadn't activated my account properly but it was fixed pretty quickly over the phone. Thanks for info Here are my settings in x-lite but unable to make outbound calls.
Incoming works great User ID: 6128XXXXXXXDomain:sip01.yesphone.au Password : Decrypted Password from https:// Name: 028XXXXXXXAuthorization Name: 6128XXXXXXX Domain Proxy Checked -- So managed to get the admin password from the router.
I've configured the client and my mobile rings on incoming call to the home service and will answer the call, but I'm unable to hear or be heard.
Hi Pete y testing Would you mind guiding me how you get your Asus RT-Ac3200 to work?